Acier galvanisé et galvalume pré-peinturé(PPGI, PPGL)

Bobine d'acier de galvalume pré-peinturé PVDF

    Nuance: JIS3321 / ASTM A792M

     

    Epaisseur: 0.15mm-1.2mm

     

    Largeur: 600mm-1250mm

     

    Standard: JIS3321/ASTM A792M

     

    Thickness: 0.15mm-1.2mm

     

    Width: 600mm-1250mm

Product Detail

Spécifications de AZ150 + PVDF Pré-peint   Aluzinc Steel:
1) Capacité: environ 10 000 tonnes par mois pour l'acier aluzinc
2) Standard: JIS3321 / ASTM A792M
3) Epaisseur: 0.15mm-1.2mm, tous disponibles
4) Largeur: 600mm-1250mm, tous disponibles
5) Longueur: selon la demande du client
6) Identification de la bobine: 508 / 610mm
7) Dureté: douce
8) Revêtement: AZ150
9) Série de couleurs: couleur RAL
10) Ordre d'essai minimal: 25 tonnes chaque épaisseur, 1x20 'par livraison
11) Application: il est idéal pour une large gamme d'applications, en particulier lorsqu'une résistance atmosphérique supérieure est requise, tel
Comme bâtiments pré-conçus, panneaux architecturaux, toitures, revêtements, revêtements et beaucoup d'autres éléments de construction.


Specification of AZ150 +PVDF Pré-peint Aluzinc Steel :
1) Capacity: about 10,000 ton per month for aluzinc steel
2) Standard: JIS3321/ASTM A792M
3) Thickness: 0.15mm-1.2mm, all available
4) Width: 600mm-1250mm, all available
5) Length: according to the customer's request
6) Coil ID: 508/610mm
7) Hardness:Soft
8) Coating: AZ150
9) Color series: RAL color
10) Min trial order: 25 ton each thickness, 1x20' per delivery 

11) Application: it is ideal for a wide range of applications, especially when superior atmospheric resistance is required, such 

as pre-engineered buildings, architectural panels, roofing, siding, cladding, and many other building components.

Les produits chez Shanghai Metal Corporation sont empaquetés et étiquetés en accord avec les régulations et les demandes du client. Nous prenons grand soin d'éviter tout dommage qui pourrait être causer lors du storage ou de la transportation du produit. De plus, des étiquettes transparentes sont posées sur le dehors des emballages pour faciliter leur identification.


Shanghai metal Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.

Production Line of AZ150 +PVDF Pré-peint Aluzinc Steel :

A typical Horizontal Color Coated Galvanized Steel Coil Line would comprise with the following steps:

 

Process Flow Diagram:

Pay off reel → double cut shear → welder-notcher → entry accumulator → pre cleaning section → furnace → hot bridle →

zinc pot → air knife → after cooler → water quench → dryer → skin pass mill → dryer → tension leveler → dryer →

chemical coater → chemical oven → cooler → exit accumulator → oiler → exit shear → tension reel.

Shanghai Metal Corporation is an international manufacturer and supplier for Prepainted Galvanized Steel Coil. We have two prepainted lines based on galvanized steel coil. Our monthly output for each line is approxiamtely 5,000 ton.

Production Facility of AZ150 +PVDF Prepained Aluzinc Steel :

Pay-off Section

The operating principles and functions are similar to the galvanizing process, except that it uses a joiner to fasten the steel sheets together.

 

Clean, Pre-treatment and Chemical Coating

The GI coil is cleaned at the degreaser tank, where oil and dust are removed by chemical means. The white rust formed on the surface can be removed at the brush assembly. The clean coil will then be coated with conditioner and chromate at the conditioner and chromate tank respectively, to provide better adhesion and corrosion resistance ability.

Prime and Finish Coating

A basic layer of paint, called primer, is applied on the chemical coater in order to strengthen the corrosion resistance and paint adhesion ability. The requested colours and specifications of paint will be applied at both the top and bottom of the primer coated coil to complete the painting work.

Prime and Finish Oven

 

The primer coating is further cured at the primer oven and cooled at the primer water quench to ensure the painted coil is completely cured. Similarly, the finish oven and finish water quench also serve to ensure that the paint applied is completely cured and cooled.

cliquez ici pour le prix
cliquez
ici
pour
prix

We will contact with you within 8 hours

* Courrier:Double check your email address, maybe you have spelling mistakes, thanks.
* Company Name:
Pays:
* Détail:
 Upload: browse