Machine à former des métaux

Machine à forger des brides d'angle en fer

    Épaisseur de bride: 3 mm-6 mm

     

    Angle de fer spec: 40 × 40 × 6; 45 × 45 × 6; 50 × 50 × 6

     

    Diamètre de bride: ψ400 ~ ψ 2000

     

     

     

     

    Flange thickness: 3mm-6mm


    Angle iron spec: 40×40×6T;45×45×6T;50×50×6T 


    Flange diameter: ψ400~ψ2000

Spécifications:

1. rouleau de formation moto: 25hp, la vitesse peut être ajustée.2. matériel de rouleau formant: SKD11

3. dureté: HRC60 ℃
4. base de rouleau formant: S541
5. transmission de rouleau de formation: puissant
6. dispositif réglable entre le rouleau formant
7. système hydraulique
8. le rouleau de formage peut être ajusté, assemblé et déchargé.
9. la section cintrage à la coupe peut être choisie automatiquement ou manuellement.
10. fonctionnement: bouton ou télécommande
11. débobiner: chargement 1200, HYD. tension
Lame de coupe:

1. matériel: SKD11
2. dureté: HRC60 ℃
3. la base des lames supérieure et inférieure est modifiable.
4. mouvement des lames: HYD.
5. la base de lame et le rouleau de section sont combinés à un ensemble complet.
6. formant le rouleau et la section Bender produisent la ligne.


Contrôleur:
1. le contrôleur produisant sont le type manuel, le type automatique et la commande à distance, tous sont avec le dispositif d'urgence.
2. la machine de rouleau formant est le système de commande de NC, écran de TFT avec le panneau tactile.
3. système HYD avec vitesse réglable.









Specifications:

1. Forming roller moto: 25HP, speed can be adjusted.
2. Forming roller material: SKD11
3. Hardness: HRC60℃
4. Forming roller base: S541
5. Forming roller transmission: powerful
6. Adjustable device between forming roller
7. Hydraulic system
8. Forming roller can be adjusted, assembled and unloaded.
9. Section bending to cutting can be chosen automatically or manually.
10. Operation: button or remote control
11. Decoil: loading 1200KG, hyd. Tension


Cutting blade:

1. Material: SKD11
2. Hardness: HRC60℃
3. Upper and lower blade base are changeable.
4. Blade movement: hyd.
5. Blade base and section roller is combined to one complete set.
6. Forming roller and section bender are producing line.


Controller:

1. Producing controller are manual type, auto type and remote control, all of them are with emergency device.
2. Forming roller machine is NC control system, TFT screen with touch panel.
3. Hyd. System with adjustable speed.





Specifications:


1. Forming roller moto: 25HP, speed can be adjusted.
2. Forming roller material: SKD11
3. Hardness: HRC60℃
4. Forming roller base: S541
5. Forming roller transmission: powerful
6. Adjustable device between forming roller
7. Hydraulic system
8. Forming roller can be adjusted, assembled and unloaded.
9. Section bending to cutting can be chosen automatically or manually.
10. Operation: button or remote control
11. Decoil: loading 1200KG, hyd. Tension


Cutting blade:


1. Material: SKD11
2. Hardness: HRC60℃
3. Upper and lower blade base are changeable.
4. Blade movement: hyd.
5. Blade base and section roller is combined to one complete set.
6. Forming roller and section bender are producing line.


Controller:


1. Producing controller are manual type, auto type and remote control, all of them are with emergency device.
2. Forming roller machine is NC control system, TFT screen with touch panel.
3. Hyd. System with adjustable speed.

cliquez ici pour le prix
cliquez
ici
pour
prix

We will contact with you within 8 hours

* Courrier:Double check your email address, maybe you have spelling mistakes, thanks.
* Company Name:
Pays:
* Détail:
 Upload: browse