Type: barre ronde, plaque
I.D .: 3-1500mm
Épaisseur: 3-180mm
Type: round bar, plate
I.D.: 3-1500mm
Thickness: 3-180mm
La barre d'acier d'alliage -d'acierl est principalement employée pour la fabrication de
matrices de travail à froid avec résistance élevée à l'abrasion et faible charge de choc.
Nous sommes ravis de fournir une large gamme d'acier allié aux clients;
Nous acceptons également la personnalisation en fonction de vos besoins.
Alloy Steel bar - Die Steel is mainly used for manufacture of
cold-work dies with high abrasive resistance and small shock load.
We are delighted to provide wide range of alloy steel to the customers;
we also accept customization according to your requirement.
Comparaison norme de Die acier
Standard Comparison of Die Steel
Spécification de Die d'acier
Taille disponible:
Barre ronde:
Diamètre 16mm-600mm
Barre plate:
Épaisseur: 16-500mm;
Largeur: 200-1100mm;
La longueur peut être adaptée aux besoins du client.
3. Processus de fusion:
EAF + LF + VD
EAF + LF + VD + ESR Note:
EAF = four à arc électrique;
LF = four à louche;
VD = dégazage sous vide;
ESR = Eleroslag refondu.
Façonner:
Forgé à chaud / laminé à chaud
État de surface:
Surface noire / tournage / fraisage / rectification / polissage
Dureté de recuit:
HB230 Max Dureté après Q + T (trempe + revenu): 47-49HRC
Specification of Die Steel:
Size Available:
Round bar:
Dia 16mm-600mm
Flat bar:
Thickness: 16-500mm;
Width: 200-1100mm;
Length can be customized.
3. Smelting Process:
EAF+LF+VD
EAF+LF+VD+ESR Note:
EAF=Electric Arc Furnace;
LF=Ladle Furnace;
VD=Vacuum Degassing;
ESR=Eleroslag Remelted.
Shaping:
Hot forged / Hot rolled
Surface condition:
Black surface/turning/milling/grinding/polishing
Annealing Hardness :
HB230 Max Hardness after Q+T(quenching+tempering):47-49HRC
Shanghai Metal Corporation, nos produits sont emballés et étiquetés conformément à la réglementation et aux demandes du client.
Un grand soin est apporté pour éviter tout dommage qui pourrait être causé lors du stockage ou du transport.
De plus, des étiquettes claires sont marquées à l'extérieur des emballages pour faciliter l'identification du produit I. D. et des informations sur la qualité.
Shanghai Metal Corporation Products are packed and labeled according to the regulations and customer's requests.
Great care is taken to avoid any damage which might be caused during storage or transportation.
In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.
Application de barre d'acier allié Die d'acier
- Moule en plastique de polissage de miroir de haute précision
- Matrice de découpage, goupille de poinçon, fil meurent meurent, meurent le meurent,
l'argile de pot meurent et formant la matrice pour des plastiques thermo-durcissants, toutes sortes de matrices
- Faire l'extrusion mourir pour l'alliage d'aluminium et longue durée de vie
moule de moulage sous pression pour l'aluminium, le magnésium, le zinc, etc.
- Pour faire la goupille de knockout / mandrin de meurent chaud
- Marteaux de forgeage de grande et moyenne taille
- Outils de coupe et outils de mesure, etc.
Caractéristiques de Die Acier:
Bonne propriété mécanique après traitement thermique, trempabilité
Procédure de traitement thermique facile, faible distorsion, polissage miroir
Capacité de gravure de motif
Application of Alloy Steel bar Die Steel:
- High precision mirror-polishing plastic mould
- Blanking die, punching pin, thread rolling die, cold heading die,
pot clay die and forming die for -thermosetting plastics, all kinds of dies
- To make extrusion die for aluminum alloy and long service life
die-casting die for aluminum, -magnesium, zinc, etc
- To make knockout pin/mandrel of hot die
- Large and medium sized hammers forging dies
- Cutting tools and measuring tools, etc
Features of Die Steel:
Good mechanical property after heat treatment, hardenability
Easy heat treatment procedure, Low distortion, mirror polishing
Pattern etching ability
We will contact with you within 8 hours