Épaisseur: 0.2mm - 2.5mm
Largeur :pas plus de 580mm
Matériel: C11000 (T2)
Thickness: 0.2mm - 2.5mm
Width: no more than 580mm
Material: C11000 (T2)
Spécifications de Cuivre Plaqué / Bande En Acier Enduit:
1. Catégorie de cuivre: C11000 (T2)
2. Catégorie en laiton: C27000 (H65), C22000 (H90)
3. Largeur: T2 (cuivre): w≤580mm
4. Épaisseur: 0.2mm - 2.5mm
5. Tolérance d'épaisseur (Δ1):
δ≤0.5mm, Δ1 = 0.04mm
1.0mm≥δ> 0.5mm, Δ1 = 0.06mm
δ> 1,0 mm, Δ1 = 0,08 mm
6. Largeur: T2 (cuivre): w≤580mm
H65 (laiton): w≤450mm
7. Tolérance de largeur (Δ2):
w≤200mm, Δ2 = 0.5mm
400mm≥w> 200mm, Δ2 = 0.8mm
w> 400mm, Δ2 = 1.0mm
8. Diamètre intérieur pour la bobine: 508mm / 250mm / 100mm
9. Diamètre extérieur pour la bobine: pas plus que 1400mm
10. Longueur pour la feuille: 450mm ~ 800mm
Bande de composite en acier de cuivre:
1. Matériel plaqué: laiton H90 / C22000 / CZ101
2. Matériel de sous-sol: acier au carbone commun / Q195
3. Épaisseur: 0.2mm-2.0mm
4. Largeur: 25mm-470mm
5. Temperature: au besoin
6. Applications: balle shell; décoration d'intérieur; pièces de jeu, etc.
Specifications of Copper Clad/Coated Steel Stri
1. Copper Grade: C11000 (T2)
2. Brass Grade: C27000 (H65), C22000 (H90)
3. Width:T2(copper): w≤580mm
4. Thickness: 0.2mm - 2.5mm
5. Tolerance of Thickness (Δ1):
δ≤0.5mm, Δ1=0.04mm
1.0mm≥δ>0.5mm, Δ1=0.06mm
δ>1.0mm, Δ1=0.08mm
6. Width:T2(copper): w≤580mm
H65(Brass): w≤450mm
7. Tolerance of Width (Δ2):
w≤200mm, Δ2=0.5mm
400mm≥w>200mm, Δ2=0.8mm
w>400mm, Δ2=1.0mm
8. Inner Diameter for Coil: 508mm/250mm/100mm
9. Outside Diameter for Coil: no more than 1400mm
10. Length for Sheet: 450mm~800mm
1. Clad material: brass H90/C22000/CZ101
2. Basement material: common carbon steel/Q195
3. Thickness: 0.2mm-2.0mm
4. Width: 25mm-470mm
5. Temper: as required
6. Applications: bullet shell; interior decoration; game coins, etc.
Composition chimique
Chemical Composition:
Emballage de bande composite en acier de cuivre:
Shanghai Metal Corporation, nos produits sont emballés et étiquetés conformément à la réglementation et aux demandes du client.
Un grand soin est apporté pour éviter tout dommage qui pourrait être causé lors du stockage ou du transport.
De plus, des étiquettes claires sont marquées à l'extérieur des emballages pour faciliter l'identification du produit I. D. et des informations sur la qualité.
1) Norme de SMC
2) Personnalisation
Packaging of Copper Steel Composite Strip:
Shanghai Metal Corporation Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.
1)SMC Standard
2)Customization
Applications de cuivre plaqué / bande en acier enduite:
1) Les balles
2) Cartouches
3) Estampage électronique
4) Matériel électronique
5) Décoration
6) Radiateurs
7) Pièces de dessin
Applications of Copper Clad/Coated Steel Strip:
1) Bullets
2) Cartridges
3) Electronic stamping
4) Electronic hardware
5) Decoration
6) Radiators
7) Drawing parts
8) Covering parts
9) Connectors
10) Heat Exchanger
11) USB Interfaces
12) Decorative Contact Chips
Manufacturing of Copper Clad/Coated Steel Strip:
We use sand paper to polish the surface of copper and steel. Then, mill imposes 130T pressure on the copper and steel to make them cohesive. Next step is the anneal procession, in which big annealing furnaces are applied. Finally, slitting machines slit large coils into the strips you want.
We will contact with you within 8 hours